| BALLS |
 |
Eclipse
Round balls with slight flattening at the poles*. Available in sizes from 3/32" -
3/16".
*Precise roundness is not required for the majority of steel media finishing applications. Thus, two small flat spots at opposite poles are not objectionable. Pole-flattened balls are less expensive to manufacture and customers benefit from these economies through lower prices.
** All decimal dimensions are approximately ± .010, with the exception that length of pins and diagonals are ± .020. |
 |
Abco
Round balls without flats for more critical finishing requirements. |
|
| CONES |
| Center flange and tapered crowns provide contact angles and on curved surfaces. Small sizes are ideal for ornamental designs. |
 |
Order
Size |
Dimensions |
| A |
B |
 |
3/16"
5/16"
1/2" |
.155"
.265"
.470" |
.200"
.315"
.535" |
|
| PINS |
| Tapering to pointed ends, pins reach into recesses and grooves,
deflash through-holes and clean threaded areas. |
 |
 |
Slim
(S)
(inches)
-
3/64" x 1/2"
1/16" x 9/32"
1/16" x 1/2" |
Taper
(T)
(inches)
3/32" x 3/8"
1/8" x 3/8"
1/8" x 1/2"
5/32" x 1/2" |
|
| OVALBALLS |
| This shape introduces an oscillating motion to the finishing mass and provides more surface-to-surface contact than balls. |
 |
Order
Size |
Dimensions |
| A |
B |
|
1/8"
5/32"
3/16"
5/16" |
.245"
.320"
.380"
.535" |
.125"
.156"
.187"
.312" |
|
| BALLCONES |
| This design combines the burnishing abilities of balls and
cones into one scientifically proportioned shape. |
 |
Order
Size |
Dimensions |
| A |
B |
|
1/8"
5/32"
3/16"
1/4"
5/16"
|
.125"
.215"
.270"
.320"
.375" |
.170"
.270"
.300"
.400"
.465" |
| ABCUT |
| Patented abrasive surface puts teeth into finishing for fast, heavy
deburring, burnishing and material removal. Available in three standard sizes. |
 |
Dimensions |
| Length |
Diameter |
|
1/8" x1/2"
5/32"x7/8"
7/32"x7/8"
|
.130 -.136"
.167 -.173"
.228 -.239"
|
|
| DIAGONALS |
| Beveled edges of diagonally-cut ends provide effective finishing
action in corners. Cylindrical body offers wide area contacts. |
 |
Order
Size |
Dimensions |
| A |
B |
C |
|
1/8"
5/32"
3/16"
7/32"
1/4"
5/16"
3/8" |
.125"
.156"
.187"
.218"
.250"
.312"
.375" |
.125"
.156"
.187"
.218"
.250"
.312"
.375" |
.225"
.275"
.325"
.380"
.445"
.545"
.655" |
|
|
* Precise
roundness is not required for the majority of steel media finishing
applications. Thus, two small flat spots at opposite poles are
not objectionable. Pole-flattened balls are less expensive to
manufacture and customers benefit from these economies through
lower prices.
** All decimal dimensions are approximately ± .010, with the exception that length of pins and diagonals are ± .020. |
